![]() |
|
Our WM-Variojet FU is a spiral pump developed for processing mortar and concrete (pre-mixed material). The advantage of this wet spraying machine is its robust and easy-to-operate construction. The WM-Variojet FU can be used for a wide variety of purposes: Materials such as mortar, sealing slurries, fillers, cement paste and SPCC mortar can be processed. The Variojet is equipped with a remote control which offers a START and STOP function. The cable length is 50 m.
The ability to disassemble the Variojet into three modules allows for easy transportation. In this, the drive with chassis, the hopper with spiral pump and the control are separated from one another.
Tested for SPCC mortar in accordance with ZTV-ING.
An electronic pressure gauge is optionally available for grouting cement paste and cement suspensions.
|
The WM-Mini FU is a light wet spraying machine designed for different application purposes and materials. When processing mortar, the maximum grain size is 3 mm. The same applies to the processing of SPCC mortar. Furthermore, our WM-Mini FU is also suitable for processing sealing slurries, fillers, cement suspensions and paints.
The eccentric spiral pump WM-Mini FU is operated with 230 V/50 Hz light flux. The connected load is 1.5 kW. The speed can be continuously adjusted using the frequency converter. The delivery includes a remote control with a cable length of 25 m. Optionally, the WM-Mini FU can be equipped with an electronic pressure gauge for grouting cement paste and cement suspensions.
![]() |
|
This turbo-charged pug mill mixer is made up of a stable steel construction and is additionally equipped with a height-adjustable chassis. Materials with a grain size of up to 8 mm can be mixed in it.
Draining is carried out via a flat side valve and, if so desired, can also be performed directly with the pump. Tested for SPCC mortar in accordance with ZTV-ING.
![]() |
|
The WM-PCS3 is a tundish spraying unit with a horizontally-installed pump.
The compact construction of the WM-PCS3 has everything it requires to be fully independent from fluctuating water pressure in the network. Accessories and tools can be stored in a cabinet attached to the machine. The machine is easily accessible and quick to clean.
The precise feeding of the dry material and the dosage of the water guarantee that the consistency of the wet mortar remains consistent.
![]() |
|
The WM-PX 660 is a mixing and conveying unit used in the refractory sector. It is suited to processing refractory masses from big bag stations with a grain size of up to 16 mm in diameter.
The machine is suitable for use in blast furnace runners, foundry ladles, tundishes, etc.
The WM-PX 660 is a tried-and-tested system with a particularly wear-resistant bearing and a manhole cover.
The water inlet can be regulated thanks to highly wear-resistant special mixing paddles and a digital dosing system.
|
The WM-PX 260 is a mixing and conveying unit used in the refractory sector.
It is suitable for processing refractory masses from big bag stations with a grain size of up to 16 mm.
Possible areas of application: blast furnace runners, foundry ladles and tundishes.
A tried-and-tested system with a particularly wear-resistant bearing.
It is equipped with a digital water dosing system (see WM-PX 660) and is highly wear-resistant thanks to special mixing paddles.
![]() |
|
This pug mill mixer or pan mixer is designed for the use of refractory material and highly abrasive mortar and concrete. All wear parts are manufactured from Hardox material. A flat side valve is available for bottom discharge and a subframe is prepared for forklift transportation.